如何提高光纖激光切割機的切割效率

　　其實我們都知道激光切割機在切割各類特殊材質的金屬時，需要添加輔助氣體與材料在高溫下產生化學反應來增加切割速度。下面就給大家簡單了解一下吧。

　　In fact, we all know that laser cutting machines need to add auxiliary gases to produce chemical reactions with materials at high temperatures to increase cutting speed when cutting various special materials of metal. Let's give you a brief introduction below.

　　激光切割機對于1mm以下的銅板，完全可以不用輔助氣體;

　　The laser cutting machine can completely eliminate the need for auxiliary gas for copper plates below 1mm;

　　其次切割機對于1mm-2mm的銅板，建議選擇氮?dú)庾鳛檩o助氣體;

　　Secondly, for copper plates with a thickness of 1mm to 2mm, it is recommended to choose nitrogen as the auxiliary gas for the cutting machine;

　　激光切割機對于2mm以上的銅板，建議選擇氧氣作為輔助氣體。

　　For copper plates larger than 2mm, it is recommended to choose oxygen as the auxiliary gas for laser cutting machines.

　　激光切割機的使用都是跟空氣壓縮機緊密相關的，壓縮空氣的品質對激光切割質量有非常直接的影響。

　　The use of laser cutting machines is closely related to air compressors, and the quality of compressed air has a very direct impact on the quality of laser cutting.

　　總的來說，激光切割機通過氣體來增加切割效率的效果是非常好的，歡迎大家前來咨詢了解更多小技巧，相信對大家一定會有幫助的。